- Direct connection to a PC
- PC Interface to serial and USB ports via the adaptor provided
- Operating Intensity presettable in 1 digit increments
- Multifinction graphic display readout
- Memory stick provided with the standard package
- No protruding elements: flush mounted infrared window
- Comfortable, unobstructed working surface
- No stray radiation
Compare pain sensitivity accurately and reproducibly in mice or rats. The animal's tail is placed over a window on the platform while the animal is restrained in an acrylic holder or by hand. A foot switch activates an intense light beam to the tail, adjustable in the range of 60°C - 170°C. When the level of discomfort is reached, the animal will flick its tail out of the beam.
The time from activation of the light beam to animal response is displayed in large LED numbers with a resolution to 0.1 seconds. Since the onset of thermal stimulation and the animal's response are both detected electronically, the operator's reaction time is not a factor.
Each Tail Flick is accurately calibrated via an I.R. Radiometer (No. 57390) to make sure that its I.R. source delivers the same power flux (expressed in mW per square cm) and hence a nociceptive stimulus of the same intensity.
An optional Tilted Mouse Restrainer (57369) is essential to keep a mouse's tail on the emitter until stimulated.
||by panel key or pedal switch
||adjustable in the interval 10-99 (in one digit steps)
||3 digits, 0.1s steps
||Halogen "Bellaphot", Mod. 64607 OSRAM, 8V-50W
||via I.R. Radiometer (No. 57390, see above)
||115 or 220 V, 50/60 Hz, 60 VA max.
||15o to 30oC
||43 x 22 x 10 cm
||13 lbs. (5.8 kg)
||20 lbs. (9.1 kg)